michaelmoses23
-
Posts
9 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by michaelmoses23
-
-
Indeed, but specially firmware work.
Ive done my fair share of meddling with firmware haha
That shouldn't be too bad
- 1
-
It isn't hard to puta umo+ board on a umo frame, you will need to cut some wood parts forthe board connectors and drill someholes for the board screws. Also the endstops have less room to move on umo frame, but nothing hard. Ofc you should drill/cut before painting. Check/print the left & bottom parts to see where the screws/holes go.
all of the drilling was done by the previous owner, but before i disassembled it i it was fully functional and the end stops were all in the correct positions,
However it will be a little more work getting the ends stops to pick um2 sliding blocks
-
There is no UM2+ dual head. If you want dual extrusion you have to use UM2 (non plus) designs.
I know.. however thats not to say a 2+ Head cant be made dual nozzle.
Stamping out an hole and fitting an extra olsson block. Sadly with the help of some chinese parts will be no worries
-
That wood panel (not the white) it's a umo (non plus) frame.
Oh that white frame it's also umo not plus.
Ah i never realised there was a difference in frames , I thought the LCD & heated bed add on basicly converted the UMO to the UMO+ ?
-
I recently purchased a UMO+ (EDIT: UMO with Heated bed and ulticontroller) that needed some work.
I will be upgrading it to a dual extrusion UM2 + printhead head, UM2 sliding blocks and gt2 belts and gears and don't forget a fully enclosed build chamber.
Any recommendations would be great
Stay tuned
-
Ultimaker never released it. Use the umo step file (it's on the um2 github...) and download the frame dxf. Mix that with the bed of um2. I did that to have an accurate model of umo+ for my mods.
Thanks mate, I didn"t realise it was tucked away in the ultimaker 2 folder
- 1
-
Thanks for the response
However i was unable to find a step file of a fully assembled umo+ there
-
Hi
I recently bought a second hand Ultimaker Original Plus which i am in the process of upgrading to a use the UM2+ upgrade kits plastic parts, with dual E3D V6 nozzles. and UM2 Sliding blocks.
I have looked on Github which has all of the individual part STEP files however no full assembly.
Does anyone have a full assembly step file for a UMO+
Would be much appreciated and make my life much easier.
Thanks
Moses.
The rebuild begins..
in Third party products & modifications
Posted
From what ive seen im the first to do this. The motion system is great.
Still waiting for amplifier boards for the pt100s to arrive before i can print