[Trouble slicing this print]

Hey guys, thanks for the feedback, I just realized that I miswrote the wall thickness as 0.15 mm when it is actually at least 1.5 mm thick. Would this still be an issue? I'll try to use netfabb and get back to the thread.

Thanks for the help!

[Trouble slicing this print]

Hi there!

I'm trying to print out a mask for someone, but I keep running into issues that I believe are based in the cura software. shows the mask on the build plate, but when I view in the layer format I get this .

I've tried different orientations , which have produced similar results, . I've also tried loading the file in both versions of cura, but without any change. I know that the mask was created with thicknesses of at least 1.5 millimeters.

Here's the file (I reduced the size by a factor of 0.9 to make it fit on the build plate): https://drive.google.com/open?id=0B7j5kYDfLjIwTHlBaWFURjI0eVk

Has anyone come across this issue before or think they know what's going on?

Thanks!