jaded
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by jaded
-
-
I am creating a multi-color print with a single extruder machine. To accomplish this design, I have four "TYPE:SKIN" sections that I need to print in a second color. Because I have only one extruder, I am making the color changes by manually inserting M600 codes in the G code. To reduce the number of manual changes from 8 to 2, I am manually moving blocks of G code to place all four TYPE:SKIN sections together.
Because the extruder values are not reset, I have to insert custom G92 E####.#### codes at the start of each moved section. If there is an option to insert G92 E0 commands to reset the extruder axis at the start of each TYPE: section, then each section becomes portable and I won't have any extra work when moving them.
Is there an option to have Cura insert these extruder reset commands at the start of each section?
Can I specify when to use extruder resets (G92 E0)?
in UltiMaker Cura
Posted
Well that's perfect! I've been using 2.6.3, so I installed 3.1 and ticked the box for relative extrusion. Just what I needed, thank you!