Wes
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Wes
-
-
trying to print an object and when it gets to the second layer the curra code sends the machine to the x and y offsets for the nozzles and then continues to print at some random offset point from this. I have doubled checked every thing i can however it is just not working. Any time i do a job with dual extruders it jus falls over. Any help would be appreciated.
I have loaded the Gcode and the current Profile if any one wants to have a look.
-
Sorry for the delay. i have been away working.
Printing via USB via Cura is the issue, the pause doesn't work and the time is roughly double plus.
-
having the same issue
-
Hi, new to the forum so if this is in the wrong area please let me know.
The attached is a small head of a fishing lure. I am having issues with printing thru Ultimaker Cura 3.2.0.
When I print with Cura.
1. It gives me a time of 28 minutes to complete, however it takes closer to 44 minutes.
2. Exporting the gcode to an SD card and printing , lets me print it in under 20 minutes.
3. there is a pause at 23mm high(to load weight into the body), doesn't work in Cura, works from the SD card.
This is currently being printed in PETG with a 0.4 nozzle.
Am I missing a setting in Cura or have I got a setting/s wrong somewhere?
Is this another issue do you think?
Cura 5.0.0 installation problems
in UltiMaker Cura
Posted
lost me as an avid user. Seems W7 64bit is still very much alive and still recieves upddates from M/Soft. Basically tells me you dont want people with a machine that is older than 2 years. way to go team dissapointment. Absolutly disgusting behavior on the part of the team.