windy54
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by windy54
-
-
Hi,
I am new to CURA 5.6, also this is my first post so apologies if it is in the wrong place.
When my print is finished I want to raise the extruder to maximum height and move the bed to the front.
How do i do this?
Do I have to create a python script?
Is there no where I can just add the G-code commands?
Is this what the retract continue script does?
I have done some searching but cant find an answer, mine you baed on my past experience I have probably entered the wrong question !
thanks
Steve
-
Hi,
I have just updated to 3.4 on my MAC and have had the same error reported earlier concerning configuration errors being reset etc.
When I try and import the following profile file I get an error message
" curaprofile.ini does not contain any valid profile"
The profile file is not empty, I have copied the first few lines below,
[profile]
layer_height = 0.1
wall_thickness = 0.8
retraction_enable = True
solid_layer_thickness = 0.6
fill_density = 20
nozzle_size = 0.4
print_speed = 50
print_temperature = 210
print_temperature2 = 0
...I am sure this file worked with the previous version but it was several months ago when I set my Balco 3D printer up.
Also tried the obvious of saving the file with different extensions.
The curaprofile,ini was downloaded from the Balco website.
I would appreciate it if someone can tell me how to solve the problem
Steve
How do i add gcode to raise extruder to max height when print completed?
in UltiMaker Cura
Posted
thanks for responses, I could not find the start and end gcode windows, I see they are in the printer settings window,
so I am in business.
Well, I will be once I have repaired my Balco touch, extruder temperature is all over the place and it is not feeeding filament so a strip down is required.