-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by rogersj3
-
-
No, there's no stream at the /?action=stream link right now. The referenced address is correct for the printer: http://192.168.1.XXX:8080/?action=stream
-
This morning I noticed something weird. During the print I had running yesterday, the camera wasn't working. I came in this morning, removed the parts and set up another print as usual from Cura. I started the print and the camera worked again. Briefly. Most of the way through the auto bed leveling process the camera feed cut off again.
So there's that. This is ~6 hour print, I'll pull logs again after it's complete.
-
Ultimaker S5 logs attached. Thanks for your assistance.
-
Interesting - after resetting my Cura Connect settings my problem is fixed as well. I thought I'd done that once already, but I guess not.
EDIT: 2 hours later, we're back to no video again. I've got a longer print running so it'll be Wednesday before I can pull logs again.
-
Log files attached, thanks for your assistance.
-
Our freshly unboxed S5 is also not displaying video in Cura, directly at the IP address, or via the app.
Camera not working after latest firmware
in UltiMaker 3D printers
Posted
Marco, when the video stream isn't working via one point it isn't working via any of the others. Directly accessing via the IP doesn't work either, as I said in my response Friday afternoon.