Witawat
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Witawat
-
-
in start point on gcode file
i need make default move x y z
to point
G28
G1 Z50 X150 Y150 F1500 ; move finished print out front
like
;FLAVOR:Marlin
;TIME:13434
;Filament used: 11.3018m
;Layer height: 0.15
;Generated with Cura_SteamEngine 3.5.1G28
G1 Z50 X150 Y150 F1500 ; move finished print out front
M140 S80
M105
M190 S80
M104 S245
M105
M109 S245
M82 ;absolute extrusion modehow to edit file default code ?
thankyou
-
Cura next version can support or fix problem ?
-
-
How to use printing Temperature Initial layer ?
in UltiMaker Cura
Posted
How to use printing Temperature Initial layer ?
i have start gcode
;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M109 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28
G0 Z30 X150 Y150 F9000
M104 S{ material_print_temperature_layer_0 } ; set extruder temp
M140 S{ material_bed_temperature_layer_0 } ; set bed temp
M190 S{ material_bed_temperature } ; wait for bed temp
M109 S{ material_print_temperature } ; wait for extruder temp
G92 E0
G1 E5 F700
G92 E0
G1 X1 Y20 Z0.3 F9000
G1 Y100 E40 F700
G92 E0
G1 Z+5 F9000
but not work