[Sidebar GUI for Cura 4]

On 1/14/2019 at 12:03 PM, nallath said:

I know. But I kinda like the new design. Mostly because I know most of the settings by heart, so I just use the search function.

 

So he's essentially making the same "mistake" we had in the first design; assume that everyone uses (or likes to do atleast) software in exactly the same way. 

heyaa,

 

pretty sure im 3times faster with scrolling to the settings cuz i know where the setting is than u with typing those mostly long setting labels  and waiting for the search results to pop up, and the load time of the search results is very bad, too. thats why i gave up the search in 3.6 already and learned the positions of the settings.

 

 

only one pro cura is left, and this is tree support. if other slicers start to implement it i finally can completly shutdown cura 4 ever.

but yep, ur tree support is great.

[Preheating in Cura. First Heatbed, second Nozzle?]

; Ender 3 Custom Start G-code

M140 S{material_bed_temperature_layer_0} ; start heating bed

M104 S170 ; start heating extruder but avoid oouzing

G28 ; home axis while heating

M420 S1 ; enable BL mesh

G1 Z10 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

M190 S{material_bed_temperature_layer_0} ; wait for bed

M104 S{material_print_temperature_layer_0} ; start heating extruder

M109 S{material_print_temperature_layer_0} ; wait for extruder

G92 E0 ; Reset Extruder

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y40 Z0.3 F1500.0 E25 ; Draw the second line

G1 X0.4 Y20 Z0.3 F1500.0 ; Draw the second line without filament

G92 E0 ; Reset Extruder

G1 Z3.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

 

try this

[Sidebar GUI for Cura 4]

i wish u could just block the computers from ultimakers so they are forced to use this shitty dropdown menu themself.