[How to print matching threads?]

On 2/16/2016 at 8:43 AM, onkelgeorg said:

This is just to share my final results with Fusion 360:

1. create threads (for example M12x1,75)

2. push the tip of the flank for a certain amount (depends on the thread size). For the given thread 0,2mm worked fine

3. round the edges of the flank tips (again 0,2mm was fine)

4. do the same for the bolt and nut

short video here: https://www.youtube.com/watch?v=IneE1eyvuuc

I made two test prints and both worked directly from the printbed.

hth

Joerg

 

I looked at the video and it looks pretty straight forward. However, do you have a video that shows how to do this on a nut? 

 

Thanks.