[Print one at a time Cura 4.2.1]

OK, thanks.

[Print one at a time Cura 4.2.1]

Yes restarted Cura.

Height only 5mm.

 

No, didn't work. Centre origin failed miserably. 

Changed the origin back to the front corner and it worked, more luck than good management.

 

as other people have stated on this forum, there are 2 grey boundaries around prints in cura.

The outer one, which Cura seems to use is not changeable, A darker (because its grey on grey) is the setting of the X Min and X Max dims in the printer settings - which changes but is ignored???

I did find something else though, The Cura build plate for the Ender 3 is 220mm x 220mm in the default settings rather than 235mm x 235mm.

 

Thanks for your help anyway.

 

[Print one at a time Cura 4.2.1]

I have changed the build plate x-axis size to 260mm and set the centre as the origin.

 

Will see if this works 🤞

[Print one at a time Cura 4.2.1]

gr5,

sounded like the answer to my prayers.

However, no different ☹️

What other ideas do you have?

 

 

 

[Print one at a time Cura 4.2.1]

When printing "one at a time", why does Cura use a X-axis separation that it doesn't use when printing "all at once".

Below "all at once".

 

 

 

"one at a time" doesn't work because of the X-axis guard area.

 

A bug me thinks?