[Can Cura 5.0.0 handled ‘if’ statements?]

Yes thanks...I also use Prusa Slicer and that is where I got the idea from. Wanted to use with Cura as well if that was possible....but I guess it isn't.

[Can Cura 5.0.0 handled ‘if’ statements?]

Thanks for reply. Ya, I could do that, and also reduce z height accordingly under printer limits to be sure no issues, but thought it would be neat if it could handle the logic…maybe in future….

[Can Cura 5.0.0 handled ‘if’ statements?]

Does anyone know if Cura 5.0.0 can handle ‘if’ statements in the machine settings start or end gcode? I’d like to add an if statement in the end gcode to raise the print head by 10mm, but only if z height is 10mm less than printer envelope. I can easily do this with an ‘if’ statement in the end gcode…but earlier versions of Cura did not allow this…or it wasn’t recognized. 

[Cura 4.11.0 - Not printing thin one layer prints.]

In order to test my bed level correctness, I typically print some one layer test squares at 0.2mm or 0.24mm thickness. However Cura 4.11.0 seems to not generate a gcode for one layer prints less than 0.3mm thickness. I had no problems doing this in Cura 4.5.0 (last Cura version I used). Is there a setting that I am unaware of in Cura 4.11.0 that needs to be changed to allow slicing below 0.3mm thickness for one layer prints?