UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
M140 S{material_bed_temperature} ; start heating the bed to what is set in Cura
M104 S{material_print_temperature} T0 ; start heating T0 to what is set in Cura
I found this entry through a net search and it should answer my question and does, except that after adding them my printer begins warming and printing immediately, no wait for warm-up. Do these entries need to be in a specific place? I put them at the beginning! Here's my start Gcode entries:
M140 S{material_bed_temperature} ; start heating the bed to what is set in Cura
M104 S{material_print_temperature} T0 ; start heating T0 to what is set in Cura
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
Start heating bed and extruder and level bed at the same time
in UltiMaker Cura
Posted · Edited by Big_O
I found this entry through a net search and it should answer my question and does, except that after adding them my printer begins warming and printing immediately, no wait for warm-up. Do these entries need to be in a specific place? I put them at the beginning! Here's my start Gcode entries:
M140 S{material_bed_temperature} ; start heating the bed to what is set in Cura
M104 S{material_print_temperature} T0 ; start heating T0 to what is set in Cura
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up