sgillespie
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by sgillespie
-
-
Also, is there any way to check the .STL file to ensure that it has been completed in a way to ensure proper 3D printing will happen OR is that done in the "preview" suggestion you had above. If so, I would need to better understand how to "preview" the layers. See .STL file.
-
For option 1: How do I verify the slicing layer by layer as you suggested in "preview" mode. See screenshot of what I see. I don't know how I go layer through layer to see it.
For option 2: Yes, the 1st photo is how I found the printer. The printer was still on and heated (220 and 60) , the extruder just stopped moving prior to completing the print. There was no notice that the model completed, no notice at all. I printed through the USB and not SD Card. I will try saving to the SD card next. When I printed through the USB, the laptop stays on so that should not have shut down the printer, but will try with SD card.
Are there some good "getting started with your first couple of 3D prints" guidelines/instructions that I can read/see. I really have not found really any good "getting started" guides so maybe I am missing something. In particular to ensuring I am using the right settings as I tried printing an X Wing sample from Thingverse and it just kind of "melted" away leaving me to assume that I need to improve the settings.
Thank you so much!
-
I am brand new to 3D printing (actually helping my 12 year old son). We have a Monoprice MP10 Mini (just bought for Christmas) and downloaded Cura 3.3.1. I tried getting a newer version of Cura but could not find the Monoprice MP10 Mini on any other Cura version other than 3.3.1. I am also using a PC but have a Mac to use as well if needed but could not find any Cura with Mac for Monoprice MP10 mini.
In any case, the 3D models that we are trying to print out are not completing and I can't find any error message as to why.
We are using Tinkercad to build the model and have tried saving as .STL and .OBJ.
The sample cat file completed its print so I know that the printer can complete a model. I also tried printing the Thingverse sample Bunchy and that printed to 75% completion. Simple models like a cube and heart have completed.
We are currently trying to print out a Star Wars X Wing and it got to 60% complete and then the printer just stopped with no error.
Based on this, I have several questions:
1. Is there anywhere on Cura 3.3.1 that I can see the error messages to try and troubleshoot
2. Is there a way that I can upgrade to a more recent Cura version for the Monoprice MP10 Mini, assuming that will help with my prints. If it does not matter, I have no problem staying on version 3.3.1.
3. Any insight as to why my 3D model is not printing? Can I tell if there is something wrong with the model that we built in Tinkercad. All the pieces look put together and they are all "grouped" so it should come out fine.
Thanks in advance for any help you can provide to total NEWBIE in 3D printing trying to help her son with building 3D models.
See attachments if that is helpful.
3D model is not completing and is not giving any errors to why (Ultimaker 3.3.1 and Monoprice MP10)
in Improve your 3D prints
Posted
Yes, I finally noticed that myself. I got everything to work. The printer was stopping because the laptop fell asleep. Now I just use the SD Card and everything is fine. We have been printing a lot and having fun. Thank you for the support