UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
I got my new PC last month and today I finally have time to get back into 3d printing. I install the latest cura 4.4.1 and it is not working so I go ahead and delete all my old config transferred from my old PC and reinstall it again. Then I am able to go into the menu screen. I can print out Ender3_Level_Test_v2.gcode, but then I go ahead into fusion 360 and try to make a model and print from stl it fails to load. The loading prompt just keep running. I then go ahead and uninstall(+delete %appdata% cura file) and install 4.3.0 and 4.2.x to tried but both fail to load stl again. Then I try to get back into 4.4.1 and tried with different stl file to see if my file corrupted and the 3 stl file I tested none of those work. Here is the step I take:
Load Ender3_Level_Test_v2.gcode to print = success
Load my Body1.stl to print = fail
Export again to see did something gone wrong in the exportation step = fail
Uninstall 4.4.1 and tried to Load my Body1.stl in 4.3.0 = fail
Uninstall 4.3.0 and tried to Load my Body1.stl in 4.2.x = fail
Go back to 4.4.1 and tried other stl file to see if my model corrupted, I make a new simple shape just to see if my body1.stl is too complicated. Body2.stl = fail
Tried to load Single_Layer_Disc.stl from the ender3 levelling file from thingiverse to see if my cura working at all. = fail
My setup is a ender 3 with OctoPrint
For plugin, I had Auto-Orientation and OctoPrint Connection installed
Help, Cura refuse to load any stl file
in UltiMaker Cura
Posted
I got my new PC last month and today I finally have time to get back into 3d printing. I install the latest cura 4.4.1 and it is not working so I go ahead and delete all my old config transferred from my old PC and reinstall it again. Then I am able to go into the menu screen. I can print out Ender3_Level_Test_v2.gcode, but then I go ahead into fusion 360 and try to make a model and print from stl it fails to load. The loading prompt just keep running. I then go ahead and uninstall(+delete %appdata% cura file) and install 4.3.0 and 4.2.x to tried but both fail to load stl again. Then I try to get back into 4.4.1 and tried with different stl file to see if my file corrupted and the 3 stl file I tested none of those work. Here is the step I take:
Load Ender3_Level_Test_v2.gcode to print = success
Load my Body1.stl to print = fail
Export again to see did something gone wrong in the exportation step = fail
Uninstall 4.4.1 and tried to Load my Body1.stl in 4.3.0 = fail
Uninstall 4.3.0 and tried to Load my Body1.stl in 4.2.x = fail
Go back to 4.4.1 and tried other stl file to see if my model corrupted, I make a new simple shape just to see if my body1.stl is too complicated. Body2.stl = fail
Tried to load Single_Layer_Disc.stl from the ender3 levelling file from thingiverse to see if my cura working at all. = fail
My setup is a ender 3 with OctoPrint
For plugin, I had Auto-Orientation and OctoPrint Connection installed
Please help 😢
cura.log Body1.stl