[Cura origin setting]

4 hours ago, tinkergnome said:

 

If there are no options for the export units in your CAD software, just use the scale function in Cura.

Cura 4.x shows the size in the lower left corner, so first scale the model to the expected dimensions and you're good to go.

 

Problem solved! thanks

[Cura origin setting]

2 hours ago, tinkergnome said:

@Joaquin87

well.... the model is very tiny.... only 0.3mm thick

Depending on the first layer height it will be printed with only one or perhaps two layers.

It seems that your expectations are different?

That's the problem because the model has 3mm thick, not 0,3mm. So maybe the problem is when I export to STL. I use Inventor for design by the way.

[Cura origin setting]

On 2/19/2020 at 11:05 AM, maht said:

This version is old and unsupported now. Please update to 4.5 and see if the issue persists.

I upgrade to the latest version but the issue persists....

 

 

 

[Cura origin setting]

I'm using Cura 15.04.5 version, and when I put an STL file into the bed print, the origin is located in the upper face of the part.
So when I export the part to .gcode it only export one layer. See the picture attached for a better understanding.

 

So my question is, how to re-locate the origin to export the entire part to print.