Jump to content

phillyjon

New member
  • Posts

    1
  • Joined

  • Last visited

Posts posted by phillyjon

  1. Hi All,

     

    I just got my Ender 3 Pro about two weeks ago.  I have gotten great prints out of it for the most part.  Benchy and a mini-3D printer test came out well.

     

    I'm currently having an issue with a very basic test object I created in FreeCad.  It is a simple flat cylinder that is 50mm wide by 2mm tall.  No matter what settings I change in Cura for the slicing, the object prints out 1.5mm high.

     

    I'm using a .4mm nozzle

    2mm layer height

    0.4mm wall line width (all lines are set to 0.4mm)

    3 wall lines = 1.2mm walls

    0.8mm bottom / top shell

    4 bottom layers / 4 top layers

     

    Cura shows the slicing as 10 layers. At 0.2mm this should add up to 2mm total height.

     

    I've tried:

     - Print thin walls

     - Infill density at 10% and 20%

     - Union overlapping features

     - stl export of item in FreeCad

     - creating a mesh version of the object and then exporting that out of FreeCad

     

    Any ideas?

     

    Thank you!

    CE3_MESH2-Disk.gcode CE3_MESH3-Disk.gcode CE3_MESH4-20pctinfill-Disk.gcode CE3_MeshDisk.gcode DiscPLAPLUSTEST.stl MeshDisk.stl MESH2-Disk.stl

×
×
  • Create New...