[Newbie Help Filament unloading before print]

After slicing and loading a print on my Ender 3 pro, after the auto bed leveling takes place, the hot end moves to the left side of the bed and the extuder backs out the filament. Here is a snip of my starting gcode. I am really baffled, I can't seem to determine what could be causing this. Any help is greatly appreciated!

 

; Ender 3 Custom Start G-code

G28 ; Home all axes

G29 ; ABL

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish