UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
I was getting good prints without an enclosure at 205c extruder temp but was having PLA prints pull away from the bed. I've built an enclosure and no longer have prints pulling away but I can't seem to get my settings dialed in. I've dropped the nozzle temp to 95c and bed temp 50c which seems to have solved many of the problems, but I'm still getting excessive extrusion at the start of each layer. Should I alter retraction settings, or add a wipe distance? I have an oil radiator heater that's heating the enclosure and this print saw ambient temperatures of 26c - 37c. Ambient temperature too high?
Excessive Z Seam Extrusion
in UltiMaker 3D printers
Posted
I was getting good prints without an enclosure at 205c extruder temp but was having PLA prints pull away from the bed. I've built an enclosure and no longer have prints pulling away but I can't seem to get my settings dialed in. I've dropped the nozzle temp to 95c and bed temp 50c which seems to have solved many of the problems, but I'm still getting excessive extrusion at the start of each layer. Should I alter retraction settings, or add a wipe distance? I have an oil radiator heater that's heating the enclosure and this print saw ambient temperatures of 26c - 37c. Ambient temperature too high?