[Strange "M82; absolute extruder mode" being added to start gcode]

Hi, All. 

 

I've started experiencing strange filament volumes on Octoprint. I've figured out that since I upgraded to Cura 4.8.0, Cura is adding a "M82; absolute extruder mode" to my start gcode. I checked my printer settings and its not inserted by me to add to start gcode. I do have stuff added to my start gcode for Octolapse and ABL. The start Gcode I added myself starts with "; Script based on an original..." and ends with "G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish". I also tried using one of the default profiles in case this was a setting I adjusted but I get the same inclusion of the strange M82 regardless of which profile settings I use.

 

If I comment out the strange M82 then Octoprint correctly see the right filament volume. 

 

See extract below with issue line bolded and entire gcode file attached. 

 

;FLAVOR:Marlin
;TIME:4839
;Filament used: 3.4782m
;Layer height: 0.2
;MINX:94.324
;MINY:79.039
;MINZ:0.2
;MAXX:142.625
;MAXY:147.5
;MAXZ:24
;Generated with Cura_SteamEngine 4.8.0
M82 ;absolute extrusion mode
; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
; An up-to-date version of the tjjfvi's original script can be found
; here: https://csi.t6.fyi/
; Note - This script will only work in Cura V4.2 and above!
; --- Global Settings
; layer_height = 0.2
; smooth_spiralized_contours = True
; magic_mesh_surface_mode = normal
; machine_extruder_count = 1
; --- Single Extruder Settings
; speed_z_hop = 5
; retraction_amount = 5
; retraction_hop = 0.2
; retraction_hop_enabled = False
; retraction_enable = True
; retraction_speed = 30
; retraction_retract_speed = 30
; retraction_prime_speed = 30
; speed_travel = 175.0

; Ender 3 Custom Start G-code
 

CAPRICORN_Cutting_2(1).gcode