[filament wraps the product like a spider web.]

On 12/21/2020 at 5:01 PM, GregValiant said:

I think you have multiple problems there. 

The support appears to be extremely under-extruded.

There is a lot of stringing and oozing (usual a problem with the temperature and retract settings.)

What printer is that?  If you could do a "File | Save Project" and post the .3mf file here it would really help.  The gcode file would be less helpful but maybe put that up here too.

 

 

Here is the stl file . Thanks for helping.

Mudhorn_Clan_v3.stl

[filament wraps the product like a spider web.]

 

filament wraps the product like a spider web. why this happening ? 

 

0.4mm nozzle

ESUN PLA+ Filament 215 C Printing Temperature

[The numbers appear correctly in the original form of the piece, but after slicing the numbers do not come out correctly]

Thanks for help. the problem was caused by nozzle size. I changed my nozzle size 0.4mm to 0.2mm in cura . Then it fixed.

[The numbers appear correctly in the original form of the piece, but after slicing the numbers do not come out correctly]

ctrlV_3D_test.stl