[setup Polymaker Polyflex TPU95-HF]

Sorry for the inaccuracy, I'm still a beginner... Cura sends the following message: 

[setup Polymaker Polyflex TPU95-HF]

Recommended printing conditions

Parameter
Nozzle temperature	200 - 220 ( ̊C)
Build Surface material	BuildTak®, Glass
Build surface treatment	Applying PVA and PVP glue to the build surface
Build plate temperature	25 - 50 ( ̊C)
Cooling fan	Turned on from second layer
Printing speed	40-100 (mm/s)
Retraction distance	1-3 (mm)
Retraction speed	60 (mm/s)
Recommended environmental temperature	Room temperature - 45 ( ̊C)
Threshold overhang angle	40 ( ̊)

 

Polymaker Factory settings Ultimaker S5 fails. Currently, printing works with the Ultimaker TPU settings. My question what I set incorrectly? Thx Gábor

[setup Polymaker Polyflex TPU95-HF]

Hi, Can anyone help Cura material settings? What parameters should I use to set a in the Cura, (Polymaker Polyflex TPU95-HF). I could not print with the settings on the manufacturer's page https://cdn-3d.niceshops.com/upload/file/PolyFlex_TPU95_HF_TDS_V4.2.pdf

greetings Gábor