[The preview has only colored lines and not "filament" layers.]

I'm sorry for the inconvenience. It really was what I wanted! I want to leave my thanks to your agility and help. Thank you very much

[The preview has only colored lines and not "filament" layers.]

On 1/12/2021 at 8:25 AM, ahoeben said:

"Compatibility mode" is limited to what it can do. If compatibility mode could do everything, it would be the only mode.

Sure. I just showed you what I did to try to solve the same colors in the preview.

[The preview has only colored lines and not "filament" layers.]

On 1/11/2021 at 11:49 PM, gr5 said:

You have a few features to enable/disable here to improve the view.  First of all you should zoom in (scroll wheel) and pan (hold down shift key, right click drag).

 

across the top of the screen look for "color scheme".  First try "filament".  I think that's what you have it set on in the lower photo.  You can change the filament color by loading different colors in the PREPARE screen and reslicing.

 

Then in "color scheme" try "line type".  I know you don't like that but it's very useful.  Yes the outer layer is red and very dark.  You can scroll through all the layers - the vertical scroll shows you each layer so you can check out if the infill is correct and look for issues with overhangs (I don't think you need any support with this model - except possibly the chin?  The shoulders look like they will be fine without support).

 

 

I understand about visualization. The problem is that I am not able to define in color scheme: type the colors that I like. Everything just turns yellow. Supports, filling ...

[The preview has only colored lines and not "filament" layers.]

When I use the slicer on an object, its preview looks awful. You can see the object, but the lines are very thin and deep color.
This only occurs when selecting "force compatibility mode".

Note: if I do not select "force compatibility mode" all line types are yellow. I would definitely like to differentiate supports from the object.