[Arc Welder Anti Stutter plugin]

Here is the firmware I am using:

 

https://www.dropbox.com/s/e8ja3lo9jnwdvuo/TH3D_Unified2_TH3D_EZBoardLite-UFW_2.13.zip?dl=0

[Arc Welder Anti Stutter plugin]

That made my printer try to print crazy fast. Lot's of clicking from the extruder. CR-10s with TH3D's EZBoard Lite, Cura 4.8.0 and, what I assume, the most current Arc Welder plugin. I don't recall the exact Marlin version I am running but it is 2 something.

 

Links included to the original .stl, Cura's .3mf layout file, Cura profiles with AW on and off, and gcode files from AW on and AW off.

 

Original .stl: https://www.dropbox.com/s/jpynj6nkb5rkfsl/sloth.stl?dl=0

.3mf layout file: https://www.dropbox.com/s/pswsva8b78tn8zd/sloth.3mf?dl=0

gcode with AW off: https://www.dropbox.com/s/ib4nsgn8t7en67h/aw_off_sloth.gcode?dl=0

gcode with AW on: https://www.dropbox.com/s/gl68ucmovmqn02i/aw_on_sloth.gcode?dl=0

cura profile with AW on: https://www.dropbox.com/s/xsjhmwskhrsso9l/aw_on_sloth.curaprofile?dl=0

cura profile with AW off: https://www.dropbox.com/s/3ofg0ba4gmth0t5/aw_off_sloth.curaprofile?dl=0

 

If you need any other information, please, let me know.

[Arc Welder Anti Stutter plugin]

With ArcWelder installed what, if anything, should I change under the Cura Mesh Resolution, Maximum Travel Resolution and Maximum Deviation settings?

 

Again, thank you for your time.

[Arc Welder Anti Stutter plugin]

Hello,

 

I have a CR-10s that I have installed about EZBoard Lite (a 32 bit board) into. I also primarily print via SD. Is this plugin if any use/interst to me? If yes, do I need to change Cura's Mesh Resolution settings at all?

 

Thank you for your time.