-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by batman2201
-
-
On 1/27/2021 at 2:22 PM, kroete said:
I received my first Ultimaker yesterday, the Ultimaker 2+ Connect and I am amazed by the print quality it produces out of the box without any levelling! In previous posts I was quite negative about Ultimaker as I thought they are n ot very innovative in comparison to e.g. Prusa but now having am Ultimaker myself and able to compare the print quality I totally changed my opinion.
For example the bed adhesion of my UM is unlike anything I ever experienced. I didn't apply any spray or glue to the glass plate and the print parts stick to it like a rock, it is unbelievable.
I still need to print more to fully experience the UM but so far I am really impressed and can justify the amount of money I spent on it.
Attached are image of a first test print out of Cura which shows the result.
Would you mind sharing the file? Just got mine Ultimaker 2+ Connect and doing some test print too.
Ultimaker 2+ Connect print quality
in Improve your 3D prints
Posted
I just received my Ultimaker 2+ Connect (without air manager), my first ever 3D printer. I have followed all the instructions from the manual to get the machine up and running. However, I can't seem to get first layer success. I need a pointer to improve overall print quality. I have attached my log file below. I used Ultimaker PLA silver that comes with the printer, Cura slicer and pre-set setting
Nozzle: 0.4mm
Infill: 30%
Resolution: 0.2mm (Draft quality)
Adhesion: No
Support: No
UM2C_Ultimaker-2C-2052_v1.2.0_2021-02-08_05-40.zip