Joel61
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Joel61
-
-
Well I have modded mine to have a camera so I can monitor the print remotely (Cant attach photos if anyone is interested, running off of an OrangePi), so I have would like to have a tab setup to show the camera, status of the print, etc... Also would like to set it up so when its done printing it can send me a notification via HA and flash the lights in my office to let me know its done.
Once I have done that much done, I will probably have more ideas flowing on things I can do-
1
-
-
I also feel quite quite strongly about this. Would love to have more information visible to us. Even if you have to toggle on an advanced mode in the settings to see it.
-
Would like to say that if any Ultimaker staff are reading this thread. I would love to be able to SSH into my UM2+C. The main reason for me is I would love to integrate it into Home Assistant. It would be as easy as adding a developer mode option in the settings, that way the port will stay closed for those who do not want SSH open.
-
I have tried with a custom profile I have created which was based off of generic Tough PLA
-
10 minutes ago, Smithy said:
When you slice something with a special (new) material profile and save the "gcode" to the USB drive, then a ufp file is written to the stick. ufp files are like gcode files, but they include much more information than just the gcode itself. And that's the way it should work to import new material profiles.
But be aware that the material profiles from the marketplace needs an update from the filament vendor to be compatible with the UM2+C. So I am not sure how much profiles are already updated.
Have tried that already and it still didnt manage to find profiles. So I am thinking maybe that is not the way to do it
-
Hi All
I have just updated my Ultimaker 2+ Connect to the v1.3 firmware and have seen that we can now add custom material profiles to the printer via USB. But for the life of me cannot work out how to export the material in .ufp (As stated here https://support.ultimaker.com/hc/en-us/articles/360017358580) and when I follow the on screen instructions it points me to a page that is a 404... https://ultimaker.com/materialprofilesIs anyone able to help me work out how I add custom material profiles directly to the printer?
I have tried:- Exporting the profile with the export button, but it only exports in .xml.fdm_material
- exporting a project that uses the custom profile
But when I connect the USB and try to import it says it cannot find anything.
Thanks!
Ultimaker 2+ Connect - bed not heating up anymore
in UltiMaker 3D printers
Posted · Edited by Joel61
Just wanted to note that mine has done the same thing. I tested with an external thermistor and it only reaches 30c when it should be at 110c. Has been working fine for the past 3 days and all of a sudden no longer wants to get hot. I have contacted the reseller and I am waiting on a response. (ordered Jan 2021)