[Cura profile for Selpic Star A]

[Cura profile for Selpic Star A]

I made fillenium malcon.

Parameters

model: fillenium malcon https://www.thingiverse.com/thing:919475 thanks!

Layer: 0.1mm

height:112.8mm

infill: 10%

Print speed:60mm/s

Travel speed:120mm/s

Print Temp:190℃

Bed Temp:60℃

Bed leveling: auto https://www.thingiverse.com/thing:4831530

time:48hour

 

robin_nano_cfg.txt

>DEFAULT_ACCELERATION        11    #X, Y, Z and E acceleration for printing moves
>DEFAULT_XJERK             8    #Default Axis-X Jerk (mm/s)
>DEFAULT_YJERK             8    #Default Axis-Y Jerk (mm/s)
 

At first glance, the speed seems to be too fast, but in reality the acceleration and jerk are so small that it does not reach the maximum speed. Acceleration and jerk values were too small. I should have set it to a higher value.

[Cura profile for Selpic Star A]

At retraction test, The speed had to be set to 30 mm / sec.

Original site: https://www.thingiverse.com/thing:4825787

 

towers.gcode

[Cura profile for Selpic Star A]

I post a recommended profile for Selpic Star A.11.curaprofileSettingManual.pdf

Thanks for Selpic's support.