roshan_ultimaker
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by roshan_ultimaker
-
-
it is new coupler but still material is coming out.i have cut the tube after your reply but it is not working
-
in my ultimaker 3d printer,boden tube is coming out from printer while printing from backside.i have changed the boden tube as well as its coupler(4 teeth holder) still problem is remained unsolved.any solution??please suggest me solution.
-
i have checked continuity, there is no resistance showing on printbed cable,from two end there is resistance but from another two there is no resistance.there might be issue of pt100,can you tell how to fix it?
-
should i try?what is your opinion
-
i have ultimaker 2 3d printer in which filament diameter 2.85mm can work but the problem is one of the client is demanding his part in colour which is only available in 1.75mm filament diameter;i have lots of unused 1.75mm dia. filament.can i print in ultimaker 2 printer with 1.75mm dia instead of 2.75mm dia???
-
i have ultimaker extended 3d printer,from last 2 days,material is coming out from boden tube from back of it while printing and material stops flowing from extruder;i want to know how to fix it?i have tried to bind it with wire but it didn't work.
-
today when i tried to start my ultimaker 2 printer, it is showing message error02;heat sensor error;please somebody suggest me the easiest solution of this and if possible send me video tutorial.i am reading online modules but i am not getting anything so please send me video tutorial
-
OK thank you for suggestion.i will follow your tips to fix these issues.I will inform you if problem will not solve.Again thank you so much for your valuable suggestions.
-
i have change permission settings,pls watch it and suggest me solution
-
i have bought ultimaker 3d printer before 5 year,for last few days it automatically gets shut down when i choose any file to put on print.i want to repair my 3d printer as soon as possible.please provide me solution to fix it.in given link there is video of problem that i am facing.waiting for reply and solution.
https://drive.google.com/file/d/12h3UxObZZHgWSTE9FUYh7SJ8VlrOjJS3/view?usp=sharing
nozzle not heating
in UltiMaker 3D printers
Posted
currently my all ultimaker 3d printers are working well but I am facing an issue in my other printer having 1.75mm filament diameter.problem is after starting print nozzle temperature reduces drastically automatically.bed temperature increases above 150 degree.due to improper nozzle temperature drop material stops extruding.can you tell how to resolve nozzle temperature droppage issue?