[Flow per material type?]

I have same question.

If i wish to set flow in material setting ... what i have to set in quality profile?
100% ?

0%

Empty? ... But how do i set this in Cura.

[All settings Lost in different installations]

Hallo,

what a holy shit.

I installed Cura 4.11 and beside Cura 4.13.

 

Starting both cura`s today and all settings are lost in both installations.
Cura starts welcome screen to create new printers.

 

How could that happen?

 

 

[Has anyone gotten the stock Cura working with the Kodak Portrait printer?]

Meanwhile it print with correct hotend.

 

The printhead seems to crash on y on left side. I checked all settings ... but until now i didn't find the error.

[Has anyone gotten the stock Cura working with the Kodak Portrait printer?]

Hello,

today i tried to get my kodak protrait work with cura 4.13.
I got it to work ... but had problem to get cura start code to work.

 

I tried printing with second extruder ... but the printer heats up hotend two ... but print with hotend one.

 

This seems to be problem using the cura start code from old kodak slicer.

 

Jürgen

[line direction of bridge first layer]

I had same problem.
Rotating the model is no solution but after rotating my buidl plate will be to small for the model.

 

Has anybody an solution?

Regards

 

Jügen