Preatorianul
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by Preatorianul
-
-
It's working after all. The previous test I made it printing on-line with the printer. Now I generated the G-Code and I print from the SD card and is working fine.
-
I Have it the same.
-
12 hours ago, GregValiant said:
I installed a Chiron in Cura and set up cooling the way you have it and it looks to be working correctly. Right under Layer:0 I get M106 S255.
With a model loaded and your settings the way you like, use the "File | Save Project" command and post the 3mf file here.
Is good to know that you made it and was right. Now let's see what is wrong with mine! First I suspected the hot-end wiring which failed first, but I have replace it. Now I started printing an old calibration file that I have it on the SD card and the cooling fan worked.
-
1 hour ago, GregValiant said:
It looks like the fan should be coming on at layer 2. If you search the gcode file is there an "M106" in there? M106 S255 would be the cooling fan at 100%.
I have just M107 for Start G-code. M106 S0 I have just at the End G-code.
-
I have just M107 for Start G-code. M106 S0 I have just at the End G-code.
-
Why my Chiron cooling fan doesn't start anymore with the last updates of Cura? I tested with an old G-Code and the fan is working but now the G-Code generated is not starting my extruder cooling fan.
G-Code incompatibility
in UltiMaker Cura
Posted
Thank you very much for your support! I previously came to the idea that Chiron is not working well with some detail settings of Cura, like the variable layer thickness. Maybe is the case now. My previous setting was to start with the regular fan speed 0.