[Unable to connect to XYZPrinting Da Vinci Pro 1.0 on Linux via USB or WiFi/WLAN]

Hi, and thanks for your quick response.

I will definitively try different USB Ports. Maybe that works.

 

But how do you get to the following conclusion?

 

On 3/15/2022 at 12:56 PM, GregValiant said:

The Octoprint/RaspPI combination seems to work well

 

On the Projekt Website they don't even mention the XYZPrinting Devices - neither for being known working nor not working.

 

Thank you

[Unable to connect to XYZPrinting Da Vinci Pro 1.0 on Linux via USB or WiFi/WLAN]

Hi, I'm new to Cura and to 3D Printing at all. I got a XYZPrinting Da Vinci Pro 1.0 Printer and I would like to use it with from my Linux Machine with Cura.

 

I installed Cura 4.13.1, added my Printer as a "Non Network Printer", choose the right model, but it doesn't show up in the Monitor.

 

Then I started researching...

 

By the way, I am on Manjaro Linux

 

uname -a
Linux NB03L 5.10.105-1-MANJARO #1 SMP PREEMPT Fri Mar 11 14:12:33 UTC 2022 x86_64 GNU/Linux

 

I connected the Printer via USB while watching at the "dmesg" output:

 

dmesg -w
...
[ 6457.857810] usb 1-2: new full-speed USB device number 12 using xhci_hcd
[ 6457.998983] usb 1-2: New USB device found, idVendor=11f1, idProduct=2520, bcdDevice= 1.00
[ 6457.998989] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 6457.998993] usb 1-2: SerialNumber: 3F1AWPEU4TH66QT354
[ 6458.002702] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[ 6632.343315] usb 1-2: USB disconnect, device number 12
[ 6636.654175] usb 1-2: new full-speed USB device number 13 using xhci_hcd
[ 6636.795602] usb 1-2: New USB device found, idVendor=11f1, idProduct=2520, bcdDevice= 1.00
[ 6636.795609] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 6636.795613] usb 1-2: SerialNumber: 3F1AWPEU4TH66QT354
[ 6636.800344] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
...

 

so the Printer should be available as "/dev/ttyACM0" - let's start Cura ...

 

I tried to run via command line as "root" to avoid Permission issues and see debug output. From there I can see that Cura seems not to be able to find a proper Baud Rate:

 

2022-03-15 10:00:43,116 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [213]: Error check finished, result = False, time = 0.8s
2022-03-15 10:00:43,255 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 115200 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:00:43,552 - DEBUG - [JobQueueWorker [1]] cura.Machines.ContainerTree.__getitem__ [120]: Adding container tree for custom took 0.25663256645202637 seconds.
2022-03-15 10:00:43,552 - DEBUG - [JobQueueWorker [1]] cura.Machines.ContainerTree.run [185]: All MachineNode loading completed
2022-03-15 10:00:47,715 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to MonitorStage
2022-03-15 10:00:47,784 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 250000 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:00:52,287 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 500000 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:00:53,041 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.015588998794555664 seconds
2022-03-15 10:00:56,794 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 230400 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:01,301 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 76800 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:05,804 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 57600 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:10,311 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 38400 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:14,818 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 19200 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:19,324 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 9600 works. Retry nr: 0. Wait timeout: 3
2022-03-15 10:01:38,844 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 115200 works. Retry nr: 1. Wait timeout: 15
2022-03-15 10:01:58,864 - DEBUG - [JobQueueWorker [0]] USBPrinting.AutoDetectBaudJob.run [49]: Checking /dev/ttyACM0 if baud rate 250000 works. Retry nr: 1. Wait timeout: 15

 

Now this is running in an endless loop. - Any Ideas on that?

 

cura.log