[Spiral mode issue]

Thank you very much! It works perfectly now. Have a wonderful day!

[Spiral mode issue]

Hello everyone,

I want to print a wing I designed in spiral mode. When I choose Surface in "Surface mode" the model looks great, but I want to have a bottom layer as well. When I select Both in "Surface mode", for some reason many lines appear inside the model, which isn't practical for my purposes. Can anyone tell me which setting I need to change so that the model has a bottom layer but it is clean on the inside.

Any help will be appreciated. Thank you!

p.s I use v. 5.0.0 if this will be useful to anyone

Wing Profile STL.stl CE3MAX_Wing Profile.3mf

[Change speed at Z not working]

Thank you for the reply. The gcode just uses F3000, so I don't think minimum layer time is interfering, and I don't use z hop so that can't be the problem either. Is there another way to do what I want as change at z has some issues for me?

[Change speed at Z not working]

I want to print my model at 100 mm/s from the 67th layer to the 178th layer, and print the rest at the model at 50mm/s. I have created two scripts to increase and decrease the speeds using the Change at Z Plugin. But when I look at the speed colour scheme there I see there is no change to the speed. Do you know what is causing this and how can I fix it?