[Cura tree support generate in air]

On 1/25/2024 at 10:00 PM, Slashee_the_Cow said:

The idea is to not generate the problem bits, not manually fix each one. I've also found that sometimes a support blocker will just make it move to next to the support blocker.

Ah, I see, to: treat the underlying disease (as opposed to the symptom). so-to-speak (which wouldnt be a viable solution really anyways it sounds like).  excellent, thank you. 

[Default Profiles]

Just for the record to anyone reading this in the future: Same thing happened to me, I created a custom profile and tried to switch to a different custom material profile, this made the profiles: "Dynamic, Standard, and super quality" dissappear. The solution to get them back, was to change back to one of the Cura Default profiles (for material). In my case I changed from "Hydro's custom filament" to "Generic PLA" and I was able to get my print quality profiles back. 

[Cura tree support generate in air]

I know its an old post, but for whoevers reading.....put a support blocker on that spot? boom, done

[Problem with first layer in Super Quality]

did you ever figure this one out? same problem

[Disconnected pieces when printing detailed part]

Thank you for this, even tho it was so long ago, this style of post where you posted your progress, helped me years later, ;)