urbanshark

This Pikachu model is just a test variant, but it's already showing clear defects at the front where the filament has oozed out, creating an uneven surface, while the sides are perfect. Since I plan to create figurines for orders, this is very critical. I would greatly appreciate it if you could share Ultimaker's recommended changes for engineering profiles.

Are my settings wrong? I just got a 3D printer and I’m printing with the standard settings at 0.15mm layer height. PLA Extruder temp: 200°C Bed temp: 60°C Print speed: 80mm/s I chose a simple toy for a test print, but the result didn’t turn out as good as I expected. Some threads are coming out of the walls, making them uneven, and I need a perfect print. Is there any way to make it look better? Any settings or advice would be appreciated!

gr5, The motors are completely new, with less than 24 hours of operation, but the printer had been idle for two years. However, I added some oil, and now it runs better. Thanks for the advice!

When going Forward and back strange sound like something stuck? When moving by my own no sound only when printing.