About This File
Layer height: 0.1mm (for a clean result)*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
Speed setups:
Infill speed: 50mm/s
Outer shell speed: 30mm/s
Inner shell speed: 20mm/s
Top/Bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30 mm/s
Amount of slower layers: 4
Infill:
InfillpPattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers - 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2 mm
Stair step height: 0.5 mm
Join distance: 0.7 mm
Area smoothing - 0.6 mm
Use towers: Check. When removing secondary structure, the model remains clean.
Pattern: Grid
Line distance - 1.5mm (for higher detail fidelity and to avoid object deformation during printing)
Platform Adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model’s height)
All basic settings by default.
Other recommendations: To make printing faster use layer height - 0.2mm for B1, B2, B3, B4, B5, B6, B8, B9, B10, B11, B12, B13, B14, B15, B16, B17, B23, B24, B25, leg parts, as they lack element detail. For other parts use 0.1mm to ensure high printing quality.
Apply basic settings.