About This File
Quality:
Layer height - 0.1mm
Initial layer thickness - 0.3mm
Bottom/top pattern - lines
Horizontal expansion - 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
Speed setups:
Infill speed - 50mm/s
Outer shell speed - 30mm/s
Inner shell speed - 20mm/s
Top/Bottom speed - 20mm/s
Support speed - 50mm/s
Travel speed - 150mm/s
Skirt speed - 30mm/s
Amount of slower layers - 4
Infill:
Infill Pattern - Grid
Line distance - 3mm
Infill Overlap - 20%
Infill Layers - 0
Support
Enable Support - check
Placement - Everywhere
Overhang angle - 30°
X/Y Distance - 0.7mm
Top Distance - 0.2mm
Bottom Distance - 0.2mm
Stair Step Height - 0.5mm
Join Distance - 0.7mm
Area Smoothing - 0.6mm
Use towers - check
Pattern - Lines
Line distance - 1.5mm
Platform Adhesion
Type - Brim
Brim Line Count -12 (up to 20, depending on the model’s height)
The model’s parts have been test printed in PLA
Recommendations
All parts will arrange on the print bed in such a way as to get a clean printing, all basic settings by default.