About This File
Description
The standard knob of Ultimaker did not really appeal to me because it was relatively difficult, e.g. to set the temperatures from 0 to 240 ° C.
With this rotary knob you can enter such values quickly.
Update 05.02.2017:
Increase the outside diameter of the knob by 1.50 mm. Acceleration of the printing process.
Materials and methods
Rotary Knob:
Material: PLA, 2,85 mm (Innofil)
Colour PLA: white
Nozzle: 0,25 mm
Layer thickness: 0,15 mm
Temperature nozzle: 240°C
Temperature buildplate: 60°C
3D-Printer: Ultimaker 2+
Colouring: white, special-acrylic-resin-spray (TS-26 from Tamiya)
Cross:
Material: PLA, 2,85 mm (Innofil)
Colour PLA: silver metallic
Nozzle: 0,25 mm
Layer thickness: 0,06 mm
Temperature nozzle: 240°C
Temperature buildplate: 60°C
3D-Printer: Ultimaker 2+
Colouring: EMAIL COLOR silver (number 90 from Revell)
The cross was printed with a supporting structure, which also closed the recess in the cross-center, for placing on the rotary knob. This structure must be cut out with a pointed object.
Sorry for my bad English.