About This File
Here are my Colorfabb dutch orange PLA/PHA Jack-O-Lanterns. (the big one was scaled 350%, other one 250%, 150% and the small one is 100%)
All together +100 hours of printing and 120 meters of filament. The bottom of the big one is 50 meters. I bought some led tea lights to fit in. (in the big one there are 4 led tea lights)
settings were : (depending on model)
0.1mm to 0.15mm layer height
30mm/s to 50mm/s print speed
250 mm/s travel speed
infill 10% to 20%