-
Posts
2,167 -
Joined
-
Last visited
-
Days Won
29
Content Type
Forums
Events
3D Prints
3D Print posted by LePaul
-
BB-8 Dome
With some extra Ultimaker 2+ printers on hand I queued three to print segments of the dome and then the top piece. Each segment took 27 hours. Printed in Simplify 3D with helper discs to ensure good corner adhesion. Minimal support, only manual support for the lower orfices in the front dome piece.
With some sanding and clean up, this will look great!
967 downloads
0 comments
Updated
-
Dragon Egg!
Just loving the Ultimaker 3! This will look even more amazing with an LED light inside!
786 downloads
0 comments
Updated
-
0 comments
Submitted
-
Lapras!
Another really nice print with the Ultimaker 3. I used a priming tower and printed at 0.10 MM layer height.
704 downloads
0 comments
Updated
-
Ultimaker Hand Drill
I saw one at the Ultimaker 3 Reveal Party in NYC back in October and wanted to make one for the coming Comic Con event! I didn't even use the best resolution! I printed this in Ultimaker Black and Green PLA at 0.20 layer height. It took 27 hours. I can only imagine how much more awesome it would look using the "Quality" setting!
789 downloads
0 comments
Updated
-
BB-8 dome top piece
In an effort to keep BB-8's dome very, very light, this piece is only 1 mm thick. Being a curved piece, it was extremely difficult to do with standard PLA based support structure.
However, the Ultimaker 3 and PVA support structure did a wonderful job with it!
936 downloads
0 comments
Updated
-
Kitten in ColorFabb bGen
I was up for a challenge and found this highly detailed kitten model
I used Simply3D and 0.2 layers
ColorFabb nGen filament
821 downloads
0 comments
Updated
-
Baby Groot
I got this model from a link the 3D Printing Nerd had provided (I think it has since moved around a bit) Per his video, I used Simplify 3D to address separated layers and then, it was easy! Generate the support structures and print each piece, body took 9 hours, head took 8 hours
Clean up was easy!
1,482 downloads
0 comments
Updated
-
Tapir Fan Shroud
The Tapir fan shroud was suggested (on YouMagine) as a means to resolve overhang issues on the UMO. Since there is only one cooling fan, overhangs are happening on the non-fan side.
1,778 downloads
0 comments
Submitted