tz-advantage
-
Posts
9 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by tz-advantage
-
-
I have a compressor with a 60l tank at 100-120 psi, i am going to try using that for cooling.
Have to find a good regulator to lower the pressure, don't want to blow away the pieces.
-
I have a Sieg C4 lathe on the way.
Making a z-coupler with a better fit will be the first task.
-
Markus,
Received them last week, and without having to pay taxes.
Prints are running smoother and more silent, so i am happy with the result.
Only Z-Axis artifacts are visible, so that will be next.
@MakingZone. It was always 2 screws. I checked the whole thread but it was never mentioned that there would be more than 2.
-
-
I have one, unfortunately no time to put it together yet.
It has a nozzle to make 3mm filament and i have a bag of PLA to start with.
Probably next month or so when i can start with it.
-
I was thinking about a new head design for the ultimaker along the same lines that has internal holes to direct an airflow provided by a fan or hose on the top. The top is now just a 'clamp', holes for mounting a fan or hose has still to be done.
It is also for mounting a second extruder. The Bowden tube(s) will be clamped.
I have stopped with it because of lack of time but for someone who is interested i have a sketchup model available that can be printed in 4 parts and is a replacement of the current head.
Here is a picture of it.
-
If you want to straighten out the bed you could use some reinforcements on the outer case and use a "moving knot".
The CNC guys use this to make sure the gantry moves on both sides exactly the same.
-
If there will be another batch i would like to reserve a full set.
Top-quality pulleys - What do you think is an appropriate price?
in Third party products & modifications
Posted
I would suggest using the same rice you used for the 'group buy'.
They were sold out pretty quick i think so the price was good.
It might even suggest a little higher is still ok.