viennamik
-
Posts
6 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by viennamik
-
-
Could his done with a plugin easy?
-
Hi,
is it possible to change the layer hight via cura during printing (for example from 0.2 to 0.05 for the layer 5mm to 8mm)?
This would be nice for some details ;-)
regards from Vienna
Michael
-
Thank you Daid for your helpful hints.
I have test it and get some very good results.
What i also found was the shrinkage of the material:
ABS 0,4-1,0 %, and for PLA 0,6-1.2%
Shrinkage depend on the cooling too. I test it with different fan parameter, and get different shrinkage.
A very interest topic !
-
Thanks for answers :-P
I will do some tests with different diameter and outher dimensions, to get the best results.
Changes in CAD is not a big problem, i use a parametric programm.
Output via STL and 0.001mm hight of triangle is no problem for cura.
-
Hi,
What do you do for right diameter in the parts?
I see that cura have no correction of the nozzle diameter, and so diameters are to small, and other lines are to big.
Do you change the modell?
Thanks
Mike
13.06.4 floppy is working with noice
in UltiMaker Cura
Posted
Hi,
When i start CURA 13.06.4 , the floppy is working, and working, and working,....
This noice is not nice to hear for the hole time 13.06.4 is started.
In settings i can`t switch that off.
I don`t have a "old" computer (3 years), and i don`t used the floppy in this time.
I think i can switch off the hardware intern, to use the latest revision :wink: