At first - sorry - for my eventually stupid questions.
At this time i collect my first experiences in 3D Printing so i'm really new in this topic.
I have a FlashForge 3 D printer (no Ultimaker ) but i hope i can ask some questions.
System description
--------------------------
Flashforge dual & sailfish 7.5
Windows 7 64 Bit Professional
Cupcake 13.11
ReplicatorG 40 r22
Makerware 2.3.1.18
In need a long start phase because my machine setup was not correct.
My first printing good results was with replicatorg - but in this software i was not able to put more than one object in the plattform.
Flashforge dual is (more or less) compatible to Replicator 1 dual if i understand it correct.
I would like to use cura - because the software looks nice, intuitive , is open source and because i can more than one object on the platform.
before i can use it , i have to solve this topics:
1. Find a solution why Cura did not recognise my printer:
Problem description:
i could not connect to my 3D Priter in Cura - get a connection timeout
(ReplicatiorG and Makerware can in my system connect)
Because autodetect not find a connection - i choose the
* variant 1 :port manually and try autodetection of baudrate
* variant 2 : port manually and try set baudrate to 115kbaud
did someone had have the same problem and/or find a solution ?
2. If this work it would be nice to print direct from cura - to do it i need a conersation from G-code to x3G format.
This can be done with GPX-gcode-to-x3g - converter correct?
How is the converter to setup ?
in which directory i should install GPX and which setting must be done in cura ?
3. why something crazy things happens if i use the cura generated G-Code in replicatorG?
Problem description - because i was not able to print direct from cura i try to import G-code to replicatorG.
If i import G-Code in replicatorG which was generated in Cura the printer did something strange - move print head to the end of X and Y achses so that the head is stopped by mechanical limit.
At first i think the machine setting was not correct in cura - but this seemed ok.
Eventually the reason is the sailfish firmware or something others.
4. Has someone profiles/setting recommendation in cura for flashforge dual?
If somebody has some informations to solve this topics it would be really helpful for me.
Best regards,
Frank