Hi, thank you for your help.
Brand new UM self assembled. During setup I encountered and issue because the head didn't move correctly on the Y axis (curious noise and no or very small movements)
Details :
- first run wizard OK (upgraded firmware to Marlin during process)
- during the bed leveling wizard, the head doesn't move to the 4 corners, move just correctly on X axis
- checked carefully stoppers pulleys, belts and explored forums
- finally tried to remove the motor and it seems to work correctly (see below when I tried to invert the motors)
- checked connections, they appears correct.
- i made the test of connecting the X axis motor in place of the Y axis motor and it reproduces the issue on the other axis
The testing is using the control pannel on the UM then prepare > Move axis > 10 mm > and chose the axis.
Result, with the X motor command all is OK, with Y motor command the result is very small and irregular movements.
I hope that I gave enough information in order to help diagnosis.
Thank you for your help.
F.