3edegre
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by 3edegre
-
-
Thanks illuminarti and gr5
Yes, you're right, it stayed on the same axis, which means it's not the stepper driver, but the underlying electronics.
I've created a support ticket ID #FYB-670-76902
Both your support are greatly appreciated.
F.
-
Thank you for this very extensive and detailed answer.
- I first tried to rotate slightly counter-clockwise the potentiometer > still very small and irregular steps for 10mm request
- then tried to rotate slightly clockwise the potentiometer > still very small and irregular steps for 10mm request
- then tried to rotate 30° clockwise the potentiometer > still very small and irregular steps for 10mm request
- launched the test for 1 mm request > movements are near the same than for 10 mm request
- then I removed carefully the stepper drivers X and Y (it was not difficult) and placed the X stepper driver in the Y slot > same wrong result.
Let me know if I can make some additional testing or how to be in touch with support about this issue.
Thank you for your cooperation.
F.
-
Hi, thank you for your help.
Brand new UM self assembled. During setup I encountered and issue because the head didn't move correctly on the Y axis (curious noise and no or very small movements)
Details :
- first run wizard OK (upgraded firmware to Marlin during process)
- during the bed leveling wizard, the head doesn't move to the 4 corners, move just correctly on X axis
- checked carefully stoppers pulleys, belts and explored forums
- finally tried to remove the motor and it seems to work correctly (see below when I tried to invert the motors)
- checked connections, they appears correct.
- i made the test of connecting the X axis motor in place of the Y axis motor and it reproduces the issue on the other axis
The testing is using the control pannel on the UM then prepare > Move axis > 10 mm > and chose the axis.
Result, with the X motor command all is OK, with Y motor command the result is very small and irregular movements.
I hope that I gave enough information in order to help diagnosis.
Thank you for your help.
F.
UM original Y axis motor command issue
in UltiMaker 3D printers
Posted
thanks gr5, I live in France and the machine is brand new (I just received it 1 week ago ;-)
I hope that the support team in Netherland will be as reactive as you were ;-) I ordered the kit especially because it was ready to ship and we have some jobs to do with.
Crossed fingers X
Thank you again.
F.