![](http://content.invisioncic.com/ultimake/set_resources_16/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
pjo1976
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by pjo1976
-
-
Hi,
Will there in the future be any direct interaction with Solidworks, thus using a Windows driver so that it recognises when the printer is connected, and also that Solidworks recognises that a printer is available.
I would like to print directly from Solidworks without having to save an STL file, then open up in Cura, just to simplify the process a little.
Regards
Paul
HeaterHead Cooling Fan not running
in UltiMaker 3D printers
Posted
I too am having the same problem.
I have done the checks and when I check the 5V between the middle leg on the transistor (GND) and the +5V pinout, when the software is not running, I get the 5V, but when the software is running I get approximately 2.3V across these pins.
Really would like to be able to solve this, I have bought a new fan, I have also replaced the BD679 darlington but still everything is the same.
Paul