[Question on infill]

Thanks guys. I have the infill set to 30. I played with higher temperatures and it seemed to maybe help a little, but the thing that helped the most was when I turned retraction off. It seems it kept doing retraction and not filling in all those spots...

 

[Question on infill]

Thanks! I'm only printing at 30mm/s The prusa i3 I have is not that fast I guess...

 

[Question on infill]

Thanks for the help. Good to know where to look.

I figured I was going too fast because the temperature is set to 190 for PLA. I'd think thats enough isn't it?

I looked at the infill speed and it was set to the same as the regular speed. I set it to 0 anyway.

Maybe I have a clog or something? Not sure. Thanks for the tip on what to look for.

 

[Question on infill]

I have a prusa i3 from makerfarm. I decided to try cura instead of slic3r. It only took a couple prints and I have switched to cura and haven't used slic3r for a while.

Can somebody give me a clue to what my infill is doing here? It seems sparse. Is this due to retraction or something?

All my infills do this with cura. It hasn't seemed to be a problem so far, but I think it might in the future be a problem with other models.

Thanks! Awesome software!