cptanpanic
-
Posts
4 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by cptanpanic
-
-
I think what dimensioneer is saying is that you can do "fix horrible A" and it will fill in the entire cube, then turn off infill (set to 0%) and set shell thickness to 0.4mm.
This should get you what you want if the object is *very* simple (e.g. no holes).
That seems like a quite a workaround. Should I open an issue for this?
-
I am having the same problem. I created a .4mm thin line cube, and can only get it to come out in Cura if I change my nozzle to .3mm whereas even .35mm doesn't work. Why is this? Link is the stl created for a 20mm x 20mm x 10mm object .4mm thick.
-
I have a new Prusa i3, and have it running. I have done some calibration stuff, including measuring extrusion distance, but have not adjusted extrusion percentage. Anyone have a tutorial, or steps so I can get adjust Cura to get accurate size holes, for example I made a part that had 5mm holes and posts. The posts did not fit in the holes. The holes were like 4.5mm.
Thanks,
CP
will youmagine get a remix function like thingiverse?
in Coffee corner
Posted
Fork