[Plateau]

Pour ceux qui on besoin de pt100 (reçu en 17 jours) http://www.aliexpress.com/item/3xWaterproof-PT100-Platinum-Resister-Temperature-Sensor-Temp-Probe/1890985056.html

 

[Plateau]

Oui la sonde est défectueuse, Le support m'a répondu au bout de 2 semaines pour m'informer qu'il allais le plus rapidement possible m'envoyer un plateau chauffant. ( peut être je vais le recevoir pour noël :wink: ) oups j'ai reçu aujourd'hui 5 jours après. Merci Ultimaker.

Je me suis dépanner provisoirement en soudant une grosse pt100 que j'avais et en la collant sous le plateau avec du mastique pour porte coupe feu :-P

 

[Plateau]

Non la pt100 du lit c'est un chips smd celle de la tete une sonde métalique cylindrique

 

[Plateau]

Bonjour,

C'est une PT100 la valeur doit être de 106-108 Ohms a température ambiante

Le support va te répondre si tu as de la chance dans une ou deux semaine ;-)

 

[ERROR - STOPPED - Temp Sensor (Machine coming back from technical center)]

i make a temporary fix with big pt100 i use high temperature mastic. Its not realy the right temp but enough to work the time to receive new part from Ultimaker.......

 

[ERROR - STOPPED - Temp Sensor (Machine coming back from technical center)]

I probe both on the connector and to pt100 directly and its open circuit.

I use the machine from 2 week only

Ultimaker have to send me a new part ( its normal )

I wanted to use this printer in my factory but, a delay of two weeks for the support thechnique it's just impossible for me it, a pity.

 

[ERROR - STOPPED - Temp Sensor (Machine coming back from technical center)]

I have the same problem ERROR – STOPPED temp sensor BED

I submit a ticket but no answer

I remove de heat bed and i mesure the temperature sensor. its open circuit not 108 ohms

I ask to ultimaker support to send me a new heat bed but nobody answere to me. I submit a tiket but no answere also

I spent more than 2000 € for this unworking machine ;-) Thanks Ultimaker

Its not fair from Ultimaker team to totaly ignore customer.

I expect a hypothetical answer

 

[How do I troubleshoot/repair an Ultimaker 2? (ERROR – STOPPED temp sensor BED)]

ERROR – STOPPED temp sensor BED

I get Ultimaker 2 few weeks ago and i get the error message ERROR – STOPPED temp sensor BED

I remove de heat bed and i mesure the temperature sensor. its open circuit not 108 ohms

I submit a ticket and send two mail to Ultimaker support and i never get answere.

How to fix the heat bed ?