sw-jeong
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by sw-jeong
-
-
Hi, I'm UM2 user in Korea, so please understand even if you can't read my English.
My problem is bad output of UM2
I've used UM2 about 1 year, but I can't get anyting from my 3D printer.
Please watch these images :
I've changed filament and nozzle(new) and PTEF coupler.
But It still doesn't work!
And I cleaned knuckle of extruder, and changed setting of filament diameter from 2.85mm to 2.95mm
How can I do more?
Please help me!
-
Hello,
I'm using 2 of UM2, from last year.
But, There are some problem lately.
As you see, Under extrusion has happened.
Both of them makes same problem.
Please help me.
I've attached stl file.
Thank you!
-
Hello Guys!
May the force be with you
And I have problem with my UM2 which bought 4 months ago.
I cannot control LED Brightness and It is so dim.
how can I do this?
plz help me!
Thank you!
-
Hello, guys!
I'm ultimaker user in Korea.
Recently, There are big trouble to my Ultimaker 2.
First, plz watch following movies
As you see, Printing quality is very poor.
And Extruder makes sound like "Dak-Dak".
I think this sound is maden by extruder slipping.
Printing condition is :
Layer thickness : 0.2mm
TOP/BOTTOM layer thickness : 0.8mm
Print Speed : 100mm/s
Fill density : 20
Support : Touching buildplate
Adhesion : Brim
Travel Speed : 150mm/s
And this is photo.
Please, Help me guys!
Your help will become very huge lucky!
Thank you!
Under Extrusion and Bad Output
in UltiMaker 3D printers
Posted
Hello,
I'm using UM2 from 2 years ago in Korea.
But recently, My UM2 have a trouble printing my cad data.
I'm using two of UM2, but all the machines make problems.
Here is the photo of output.
What is the problem?
This is my CURA setting
Layer Height : 0.1mm
Wall Thickness : 0.8mm
Top/Bottom Thickness : 0,.8mm
Infill Density : 20%
Enable Retraction
Print Speed : 60mm/s
Travel Speed : 120mm/s
Enable Support
Placement : Everywhere
Enable Support Roof
Support Roof Density : 100%
Adhesion Type : Brim
Brim Width : 10mm