Jump to content

gloveside45

Dormant
  • Posts

    1
  • Joined

  • Last visited

    Never

gloveside45's Achievements

0

Reputation

  1. I have the same problem. I decided to open up Expert Settings after having several failed attempts to print standard objects in greater detail. I was using High Res in the basic menu and the results were nowhere near high quality. Each subsequent print of the same object yielded different results. So I opened up Expert Settings...Wrong thing to do! The first thing I went in and changed was layer settings, I went from 0.1 to 0.6 in an attempt to print a gear with a hole that measted 0.75mm radius. I hoped that decreasing the layer thickiness would allow me to print the hole as basic high res settings woudn't. I also changed the speed from 50 to 20 in what I thought was an attempt to slow down the print head for a better quality print. Well when I hit print with the new setting all hell broke loose. The head didn't lay down any material onto the buildplate, it all globed up around the head. What a mess. I can't get this printer dialed in for the life of me and I'm a software and hardware engineer.
×
×
  • Create New...