frederics
-
Posts
6 -
Joined
-
Last visited
Never
Content Type
Forums
Events
3D Prints
Posts posted by frederics
-
-
Hello all!! I have experimented a wide variety of materials in the past on my UM2 and after some troubleshooting I have always been able to print them correctly.
Unfortunately this time I admit the defeat against Bamboofill and Laybrick.
Both of them start very well but at some point of the print( maybe even after several hours of print) I start having a severe under-extrusion that ends up in a clogged nozzle.
I tried everything:
-Clean the nozzle
-Clean the feeder
-Adjust the tension of the feeder
-Clean the bowden tube
-Try different temperatures
-Make the print fast with thicker layers to reduce the time of the filament in the hot end.
- Dry the filament
etc.etc.etc. I could stay one day listing all of them.
But I have always been unable to end a print decently. What I really don't understand is why it happens suddenly and maybe after several hours of perfect printing.
I was wondering if any of you could share his experience with those materials and maybe share the settings that made those filaments to print properly.
Many thanks in advance!!!
Federico
-
Thank you!
-
Thanks a lot!!! I've found it on Amazon UK. Will arrive in 1-2 days, hope the replacement process won't be too complicated!!
Thank you again.
Federico
-
Hi all!
I am a proud owner of an U2 and I am really happy so far of the performances of the printer. Unfortunately few days ago I accidentally broke one blade of the main fan but couldn't find a replacement on the Ultimaker website. Anybody has a good tip on where to buy a good replacement fan?
Thank you in advance!
Federico
-
Hello everybody! I have been using Ultimaker 2 for a long time and am very happy of the results so far. Unfortunately yesterday I accidentally inserted some filament in the main fan and one of the blades broke :cry: :cry: . I have checked on the website but could't find it as a spare part. Any suggestion on where to buy it?
Thank you very much in advance for your support.
Federico
Bamboofill & Laybrick underextrusion issues
in UltiMaker 3D printers
Posted
Thanks for the reply!! I actually tried all the above already, i printed up to 0.27mm at speed of 60/70 mm/s reducing the layer time to zero but no luck. I even thought that the filament could have absorbed moisture and bought a new one but still had the same issues.
Its kind of strange as I often print with woodfill and never have issues.
I'll keep on doing attempts and keep you updated.
Thanks anyways!!